Got Questions?

  • Many e-bikes weigh 25–30kg or more. Lifting them onto a conventional bike rack can be difficult, especially for older riders. EziLift removes much of the lifting effort, making it easier and safer to get out and enjoy your ride.

  • EziLift lowers to a comfortable loading height, making it easier to load and unload heavy bikes, particularly e-bikes. Once loaded, the rack is raised into its transport position with minimal effort.

  • Yes. EziLift has been designed specifically with modern e-bikes in mind, which are often significantly heavier than traditional bicycles.

  • EziLift is available in configurations designed to carry up to four bikes. Check the specifications for your model or get in touch for more info.

  • Yes, the rack is designed to allow access to the rear of the vehicle. The amount of clearance may vary depending on the vehicle and bike configuration.

  • EziLift mounts securely to a compatible towbar and includes locking mechanisms to help prevent movement during transport.

    A 19mm spanner is required to secure the drawbar locking mechanism. No tools are required for securing the bikes onto the rack.

  • Yes. EziLift includes provisions for securing bikes to the rack. Additional security locks may also be used

  • EziLift is backed by a manufacturer's warranty covering defects in materials and workmanship. Contact us for full warranty details.

  • Yes. We can provide a pouch for your supplementary plate with Velcro straps.

  • The maximum weight capacity depends on the model. Refer to the product specifications for the allowable bike and total rack load limits, or contact us.

  • EziLift is designed to fit vehicles equipped with a compatible towbar.

    Contact us if you're unsure whether your vehicle is suitable.

  • Yes. EziLift secures bikes without placing excessive stress on carbon fibre frames when used according to the instructions.

  • Most people find loading significantly easier than with conventional bike racks because the bikes are loaded at a lower height.

  • EziLift is powered by a 12-volt DC supply and typically requires up to 8 amps during operation. The system connects via a standard Anderson plug.

    If your vehicle or caravan is not already fitted with an Anderson plug, a qualified auto electrician can easily install one.

  • Yes, many customers do. However, regular inspection and maintenance are recommended

  • Yes. EziLift is proudly designed and manufactured in New Zealand.

  • You can contact us directly through our website or email us at info@ezilift.co.nz.

  • In some cases, this may be necessary. Dependent on your vehicle and number of bikes. Call Steve to discuss.